Description

Aqua Boss XR-Halo Invisible Penetrating Sealer

Aqua Boss XR-Halo Invisible Penetrating Sealer is a water-based Silicone Water Repellent made of a special hybrid of Silane and Siloxane.  Aqua Boss XR-Halo provides water repellency to porous construction materials such as concrete, bricks, pavers, stone, masonry blocks, mortar and grout. It is not suitable for very low-porosity substrates such as polished stone.

The active ingredients in Aqua Boss XR-Halo Invisible Penetrating  Water Repellent Sealer are a mixture of different-size particles-some larger, some smaller-to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in Aqua Boss XR-Halo Water Repellent chemically reacts with the substrate, ensuring long-lasting performance. This product’s excellent water repellency and fast beading action are immediately apparent. What you will not see is any significant change in the substrate’s original appearance. Unlike most water repellents, Aqua Boss XR-Halo can be applied to uncured concrete once bleed water has evaporated. However, the penetration, performance, and durability of Aqua Boss XR-Halo is increased by every day that application can be delayed up to 28 days.

FEATURES
Does not alter appearance of the surface and also has Low V.O.C. Can be applied to fresh concrete and water beading immediately upon contact.

PREPARATION
Clean dirt, wax, grease, oil and other contaminants from the surface. Be sure to remove any foreign coating unless previous coating is same or similar water-based sealer. Make sure the surface is clean, dry and sound. Clean oily concrete with a CLEANER DEGREASER. Use a bristle brush for heavily oiled spots. If surface is slick, etch with an ETCHER & CLEANER. Rinse well with a pressure washer. Allow 24 hours to dry. Apply only when surface and air temperatures are above 50° F and below 90° F. Do not apply to excessively hot surfaces as rapid drying may cause streaking to form.

APPLICATION
Aqua Boss XR-Halo may be applied to dry or damp concrete. Rolling is recommended for best effect. When spraying, avoid over spray. Fresh Concrete should be solid enough to walk on. Protect all nearby vegetation and other surfaces made of glass, aluminum, or metal. Apply thoroughly to saturation with sprayer, roller, or brush. Do not puddle. For vertical surfaces, apply from bottom up.  Apply second coat wet on wet.

NET COVERAGE RATE
Coverage rate is approximately 200ft² per gallon depending on the porosity of the substrate.